Check out (or don’t!) my soldering skills.  If you do you’ll notice that:

  • I didn’t clean off the flux before taking pictures
  • There are one or two places where the board got a little too hot
  • There are a couple cold solders (blobby, not cones)
  • There is nothing fatally wrong with any of my solder joints  🙂

 

Soldered from the other side, so this is flow-thru

Soldered from the other side, so this is flow-thru

 

The opposite bank of pins

The opposite bank of pins

 

 

View from the soldered side

View from the soldered side

 

And again, the opposite bank of pins

And again, the opposite bank of pins